Loading ...
Loading ...
Loading ...
Installation Instructions
WARNING!
ANTI-TIP DEVICE
@
®
All ranges can tip end injurg could result.
To prevent accidental tipping of the range,
attach an approved Anti-Tip device to the
wall. {See Installing the Anti-Tip Device in this
section.) To check if the device is installed and
engaged properlg, carefullg tip the range
forward. The Anti-Tip device should engage
and prevent the range from tipping over.
If gou pull the range out from the wall for
ang reason, make sure the Anti-Tip device
is engaged when gou push the range back
against the wall.
[] For your sufety, never use your range for wurming
or heating the room. Your oven and cooktop ure not
designed to heat your kitchen. Top burners should
not be operated without cookware on the grate. Such
abuse could result in fire and damage to your range
and will void your warranty.
[] Do not store or use combustible materials, gasoline
or other flammable vapors and liquids in the vicinity
of this or any other appliance. Explosions or fires
could result.
[] Do not use oven for a storage area. Items stored
in the oven can ignite.
[] Do not let cooking grease or other flammable
materials accumulate in or near the range.
LOCATION
Do not locate the range where it mag be subject to
strong drafts. Ang openings in the floor or wall behind
the range should be sealed. Make sure the openings
around the base of the range that supplg fresh air for
combustion and ventilation are not obstructed bg
carpeting or woodwork.
Yourrange, like many other household items, is heavy and
can settle into soft floor coverings such as cushioned vinyl
or carpeting. Usecare when moving the range on this type
of flooring. It is recommended that the following simple and
inexpensive instructions be followed to protect your floor
The range should be installed on a sheet of plywood (or
similar material).When the floor covering ends at the front
of the range, the area that the range will rest on should be
built up with plywood to the same level or higher than the
floor covering.
This will allow the range to be moved for cleaning or
servicing.Also,make sure your floor covering will withstand
180°R(Seethe Installation Safety Instructions section.)
Make sure the wall coverings around your range can
withstand the heat generated (up to 200°F)by the range.
(Seethe Installation 5ofetg Instructions section.)
IMPORTANT!
Remove all tape and packaging. Make sure the burners
are properlg seated and level.
Take the accessorgpack out of the oven andlor drawer.
Check to be sure that no range parts have come loose
during shipping.
37
Loading ...
Loading ...
Loading ...