Loading ...
Loading ...
Loading ...
Cleaning and maintenance
68
6. After approximately 20 seconds, a
warning appears on the display
indicating that the oven cavity cooling
procedure is in progress.
7. Wait for the oven to cool down and
collect the residues deposited inside with
a damp microfibre cloth.
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time.
1. After having selected the duration of the
pyrolytic cycle and having pressed the
symbol to confirm, press the
symbol.
2. Press function delayed.
3. Enter the required end of cooking time
(for example 19.30: first touch the hours
box, then the numbers 1 and 9; next,
touch the minutes box and then the
numbers 3 and 0).
4. Press the symbol to confirm.
5. The appliance waits for the set start time
to be reached and then starts the
cleaning cycle.
During the first pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolytic cycle.
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolytic cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
If the pyrolytic cycle gives
unsatisfactory results at minimum
duration, it is recommended to set
a longer time for successive
cleaning cycles.
Loading ...
Loading ...
Loading ...