Loading ...
Loading ...
Loading ...
Safety features
51
Overheating protection
All the induction coils and heat sinks for
the electronic module are fitted with an
overheating protection mechanism.
Before the induction coils or heat sinks
get too hot, the overheating protection
mechanism intervenes in one of the
following ways:
Induction coils
- Any Booster function in operation will
be switched off.
- The set power level will be reduced.
- The cooking zone turns off
automatically. will flash alternately
within the timer display.
You can use the cooking zone again as
usual when the fault message has gone
out.
Heat sinks
- Any Booster function in operation will
be switched off.
- The set power level will be reduced.
- The cooking zones switch off
automatically.
The affected cooking zones can only be
used again as usual once the cooling
element has cooled down to a safe
level.
The overheating protection may be
activated under the following
circumstances:
- The cookware being heated is empty.
- Fat or oil is being heated on a high
power level.
- There is insufficient ventilation to the
underside of the hob.
- A hot cooking zone is switched back
on after an interruption to the power
supply.
If, despite removing the cause, the
overheating protection mechanism
triggers again, contact customer
service.
Loading ...
Loading ...
Loading ...