Loading ...
Loading ...
Loading ...
Additional functions
47
Stop&Go
When Stop&Go is activated, the power
of all cooking zones in use is reduced to
power level1.
The cooking zone power levels and the
timer settings cannot be altered; the
hob can only be switched off. The
minute minder, switch-off, Booster and
heat-up times continue to run.
When Stop&Go is deactivated, the
cooking zones will operate at the power
level previously selected.
If the function is not deactivated within
1hour, the hob will switch off.
Activating/Deactivating
Touch the sensor control.
Use this function when the sensors
need to be cleaned quickly or there is a
risk of boiling over.
Recall
If the hob is switched off by mistake
during use, this function can be used to
reset all settings. For this to work, the
hob must be switched on again within
10seconds of being switched off.
Switch the hob on again.
Immediately after switching the hob
on, touch one of the flashing cooking
zone sensor controls.
Loading ...
Loading ...
Loading ...