Loading ...
Loading ...
Loading ...
Safety features
50
Safety switch-off
Safety switch-off if the sensors are
covered
Your hob will switch off automatically if
one or several of the sensors remain
covered for longer than 10seconds, for
example, by finger contact, food boiling
over or by an object such as an oven
glove or tea towel. will appear in the
timer display for a few seconds. If
the sensor is affected, will light up
until the object or soiling has been
removed.
will go out once you have removed
the object or cleaned the hob and the
hob will be ready to use again.
Excessive operating time
The safety switch-off mechanism is
triggered automatically if a cooking
zone is heated for an unusually long
period of time. This time depends on
the power level selected. If it has been
exceeded, the cooking zone switches
off and the residual heat indicator
appears. If you switch the cooking zone
on and off again, it is ready for
operation again.
The hob is programmed to safety
setting 0 at the factory. If necessary, a
higher safety setting with a shorter
maximum operating time can be set
(see chart).
Power level* Maximum operating time
[h:min]
Safety setting
0** 1 2
1 10:00 8:00 5:00
1. 10:00 7:00 4:00
2/2. 5:00 4:00 3:00
3/3. 5:00 3:30 2:00
4/4. 4:00 2:00 1:30
5/5. 4:00 1:30 1:00
6/6. 4:00 1:00 0:30
7/7. 4:00 0:42 0:24
8 4:00 0:30 0:20
8. 4:00 0:30 0:18
9 1:00 0:24 0:10
* The power levels with a dot after the
number are only available if the power level
range has been extended (see “Setting
range”).
** Factory default setting
Loading ...
Loading ...
Loading ...