Loading ...
Loading ...
Loading ...
÷
BLESH
÷
PROBLEM SOLUTION
Smoothtop surface shows 1+Thy scratches or abrask)ns+
wear. , Make sure cooktop and pan bottom are dean. Do not sHidegHassor metaHpans
across top+ Make sure pan bottom is not rough. Use the recommended
cleaning agents. See page 25+
2. MetaHmarks.
, Do not sHidemetaHpans across top. When cool dean with Cooktop
CHeaningCreme. See page 25.
3. Brown streaks and specks.
, Remove spills promptHy.Never wipe with a soiHedcloth or sponge. Make sure
cooktop and pan bottom are dean.
4. Areas with a metallic sheen.
, Mineral deposits from water and food. Use recommended cHeaningagents.
See page 25.
5. Pitting or flaking.
+ Remove sugary boiHoverspromptHy.See page 25.
Moisture collects on oven + This is normal when cooking foods high in moisture.
window or steam comes from , Excessive moisture was used when cleaning the window.
oven vent.
There is a strong odor or light + This is normal for a new range and will disappear after a few uses. hitiating a clean
smoke when oven is turned on. cycle will "burn off" the odors more quickly.
, Turning on a ventilation fan will help remove the smoke and/or odor.
, Excessive food soils on the oven bottom. Use a self=clean cycle.
Fault Codes + BAKE or LOCK may flash rapidly in the display to alert you if there is an error
or a problem. If BAKE or LOCK appear in the display, press CANCEL pad.
If BAKE or LOCK continue to flash, disconnect power to the appliance.
Wait a few minutes, and then reconnect power. If the flashing still continues,
disconnect power to the appliance and call an authorized servicer.
+ If the oven is heavily soiled, excessive fiareups may result in a fault code during
cleaning. Pressthe CANCEL pad and allow the oven to cool completely, wipe out
excess soil, then reset the clean cycle. If the fault code reappears, contact an
authorized servicer.
Noises may be heard. + The oven makes several low level noises. You may hear the oven relays as they go on
and off. This is normal.
+ As the oven heats and cools, you may hear sounds of metal parts expanding and
contracting. This is normal and will not damage your appliance.
There are no beeps and + Oven may be in Sabbath Mode. See page 18.
"SAb" flashing and then + Oven is in Sabbath Mode. To cancel, press and hold the Clock pad for five
seconds.
÷
3O
8113P417-6OB 31 + 9/28/04, I1:40 AM
Loading ...
Loading ...
Loading ...