Loading ...
Loading ...
Loading ...
Gas Conversion and Specifications
21
Gas Type Identification Label
On completion of gas conversion, replace gas type identification label, located at:-
- Rear of the unit, above gas connection.
- Beside the Rating Plate.
Commissioning
Before leaving the installation;
1. Check all gas connections for leakages using soapy water or other gas detecting equipment.
2. Carry out a ‘Commissioning’ check of appliance as shown in Installation Section of this manual.
3. Ensure any adjustments done to components that have adjustments / settings paint sealed are to be
re-sealed.
DO NOT USE A NAKED FLAME TO CHECK FOR GAS LEAKAGES.
Warning
Loading ...
Loading ...
Loading ...