Loading ...
Loading ...
Loading ...
Installation
11
Fitting Leg Stand to Target Top
1. Remove centre casting from target top using
casting removal tool.
2. Remove 2 half plate castings and all fire bricks
from target top.
3. Lower target top onto it’s rear face.
4. Attach four hob legs to leg mounting positions on
underside of target top. Secure each leg hand
tight.
5. Align four round cut out holes on base tray with
four hob legs already fitted to target top (Ensure
that base tray is orientated with sloping edge of
base tray facing front of unit.
6. Slot base tray onto four hob legs and push fully
home.
7. Secure base tray to hob legs by screwing two front
adjustable feet supplied, into base of front hob
legs. Secure each adjustable foot hand tight.
8. Fit rear rollers to rear leg ring plates and secure
using the locating bolts supplied. Tighten bolts
using a 10mm spanner.
9. Lift target top back onto its legs.
10. Refit all fire bricks, 2 half plate castings and centre
casting to target top.
NOTE: This appliance is fitted with adjustable feet / rear rollers to enable appliance to be
positioned securely and level. This should be carried out on completion of gas connection.
Refer to ‘Gas Connection’ section.
Fig 1
Sloping Edge
of Base Tray
Rear Roller
Base Tray
Target Top
Legs
Leg Mount
Points
Target Top
To prevent equipment damage and risk of injury, remove all castings, fire
bricks and other removable items prior to fitting leg stand.
Caution
Loading ...
Loading ...
Loading ...