Craftsman 13930437 Garage Door Opener WiTH AssureLink CONNECTiViTY

Owner's Manual - Page 31

For 13930437.

PDF File Manual, 80 pages, Read Online | Download pdf file

13930437 photo
Loading ...
Loading ...
Loading ...
OPERATION
llVlPORTANTSAFETYiNSTRUCTiONS
To reducethe risk of SEVEREiNJURYor DEATH:
1. READAND FOLLOWALL WARNINGSAND iNSTRUCTiONS.
2. ALWAYSkeep remote controls out of reach of children.
NEVERpermit children to operate or play with garage door
control push buttons or remote controls.
3. ONLYactivate garage door when it can be seen clearly, it is
properly adjusted, and there are no obstructions to door
travel.
4. ALWAYSkeep garage door in sight and away from people
and objects until completely closed. NOONESHOULD
CROSSTHE PATHOFTHE MOVINGDOOR.
5. NO ONESHOULDGO UNDERA STOPPED,PARTIALLY
OPENEDDOOR.
6. if possible, use emergency release handleto disengage
trolley ONLYwhen garage door is CLOSED.Use caution
when using the releasewith the door open. Weak or broken
springs or unbalanced door could result in an open door
failing rapidly and/or unexpectedly, and increasingthe risk of
SEVEREINJURY or DEATH.
7. NEVERuse emergency release handle unless garage
doorway is clear of persons and obstructions.
8. NEVERuse handle to pull garagedoor open or closed, if
rope knot becomes untied, you could fall.
9. After ANY adjustments are made, the safety reversal
system MUST be tested.
10. Safety reversalsystem MUST be tested every month.
Garagedoor MUST reverse on contact with 1-1/2" high
(3.8 cm) object (or a 2x4 laid flat) on the floor. Failureto
adjust the opener properly increases the risk of SEVERE
INJURYor DEATH.
11. ALWAYS KEEPGARAGEDOORPROPERLYBALANCED
(see page3). An improperly balanceddoor may NOT
reversewhen required and could result in SEVEREINJURY
or DEATH.
12. ALL repairs to cables, spring assembliesand other
hardware, ALL of which are under EXTREMEtension,
MUST be made by a trained door systems technician.
13. ALWAYSdisconnect electric power to garage door opener
BEFOREmaking ANY repairs or removing covers.
14. This operator system is equipped with an unattended
operation feature. The door could move unexpectedly. NO
ONESHOULDCROSSTHE PATHOFTHE MOVINGDOOR.
15. DONOTenablethe Timer-to-Close functionality if operating
either one-piece or swinging garage doors. To be enabled
ONLYwhen operating a sectional door.
16SAVETHESEINSTRUCTIONS.
Features
Your garage door opener is equipped with features to provide you
with greater control over your garagedoor operation.
TIMER-TO-CLOSE
The Timer-to-Close feature automatically closes the door after a
specified time period that can be adjusted using the door control.
Prior to the door closing there will be an audible and visual alert.
ASSURELINKTM
AssureLinkTM technology uses a 900MHz signal to provide
two-way communication between the garage door opener and
AssureLinkTM accessories. Your garagedoor opener is compatible
with up to 8 AssureLinkTM accessories.
ASSURELINKTM REMOTECONTROLSAND DOORCONTROLS
Your garage door opener has already been programmed at the
factory to operatewith your remote control, which changes with
each use, randomly accessing over 100 billion new codes. Older
Craftsman accessories are not compatible.
Up to 8
Up to 2 AssureLinkTM door controls.
Upto 1
31
THEPROTECTORSYSTEM®(SAFETY REVERSINGSENSORS)
When properly connected and aligned, the safety reversing
sensors will detect an obstruction in the path of the infrared
beam. if an obstruction breaks the infraredbeam while the door
is closing, the door will stop and reverse to full open position,
and the opener lightswill flash 10 times, if the door isfully open,
and the safety reversing sensors are not installed,or are
misaligned, the door will not close from a remote control.
However,you can close the door if you hold the button on the
door control or keyless entry until the door is fully closed. The
safety reversing sensors do no effect the opening cycle.
ENERGYCONSERVATION
For energy efficiency the garage door opener will enter sleep
mode when the door is fully closed. The sleep mode shuts the
garagedoor opener down until activated. The sleep mode is
sequencedwith the garage door opener lightbulb; as the light
bulb turns off the sensor LEDs will turn off and whenever the
garagedoor opener lightsturn on the sensor LEDswill light.
The garage door openerwill not go into the sleep mode until the
garagedoor opener has completed 5 cycles upon power up.
LIGHTS
The garage door opener light bulbs will turn on when the opener
is initiallyplugged in; power is restored after interruption, or
when the garagedoor opener is activated. The lights wiii turn off
automatically after 4-1/2 minutes. An incandescentA19 light bulb
(100 watt maximum) or for maximum energy efficiency a 26W
(100W equivalent) compact fluorescent light(CFL) bulb may
be used.
Loading ...
Loading ...
Loading ...