Craftsman 13930437 Garage Door Opener WiTH AssureLink CONNECTiViTY

Owner's Manual - Page 17

For 13930437.

PDF File Manual, 80 pages, Read Online | Download pdf file

13930437 photo
Loading ...
Loading ...
Loading ...
iNSTALLATiON STEP 6
install the Lights
1. Pressthe releasetabs on both sides of lens. Gentlyrotate lens
back and downward until the lens hinge is in the fully open
position. Do not removethe lens.
2. Insert an A19 incandescent (lOOW maximum) or compact
fluorescent (26W, IOOWequivalent) light bulb into the light
socket. The lights will turn ONand remain lit for approximately
4-1/2 minutes when power is connected.Then the lights will
turn OFF.
3. Reversethe procedure to close the lens.
4. If the bulbs burn out prematurely due to vibration, replacewith
a garage door opener bulb. UseA19, standard neck garage
door opener for replacement.
NOTE:Do not use halogen, short neck, or specialty light bulbs as
these may overheatthe end panel or light socket. Do not use LED
bulbs as they may reduce the range or performance of your
remote control(s).
To prevent possible OVERHEATINGof the end panel or light
socket:
* UseONLYA19 incandescent(IOOW maximum) or compact
fluorescent (26W maximum) light bulbs.
* DONOTuse incandescent bulbs larger than IOOW.
* DONOTuse compact fluorescent light bulbs larger than
26W (IOOW) equivalent.
* DONOTuse halogen bulbs.
* DONOTuse short neck or specialty light bulbs.
Release Tab
Compact Fluorescent --
Light Bulb
,/ 100Watt(Max)
Standard Light Bulb
!
100Watt(Max) \
Standard Light Bulb _
Hinge
Compact Fluorescent
Light Bulb
iNSTALLATiON STEP 7
Attach the EmergencyRelease Rope and Handle
1. Insertoneendof the emergencyreleaseropethroughthe handle.
Makesurethat"NOTICE"is right sideup.Tiea knotat least1 inch
(2.5 cm)from the endof the emergencyreleaserope.
2. insertthe otherend of the emergencyreleaseropethroughthe holein
the trolleyreleasearm. Mountthe emergencyreleasewithinreach,but
at least6feet (1.83 m) abovethefloor, avoidingcontactwithvehicles
to preventaccidentalreleaseand securewith a knot.
NOTE:If it is necessary to cut the emergency release rope, seal
the cut end with a match or lighter to prevent unraveling. Ensure
the emergency release rope and handle are above the top of aft
vehicles to avoid entanglement.
To prevent possible SERIOUSINJURYor DEATHfrom a falling
garage door:
* If possible, use emergency release handle to disengage
trolley ONLYwhen garage door is CLOSED.Weak or broken
springs or unbalanced door could result in an open door
falling rapidly and/or unexpectedly.
* NEVERuse emergency release handle unless garage
doorway is clear of persons and obstructions.
* NEVERuse handle to pull door open or closed. If rope knot
becomes untied, you could fall.
Trolley
Trolle
Release
Arm
Emergency
Release Handle
Overhand
Knot
17
Loading ...
Loading ...
Loading ...