Loading ...
Loading ...
Loading ...
Unpacking and installing
*INSTALLATION*
21
Unpacking the coffee machine
Unpack the coffee machine.
Remove any protective film and
notices from the machine.
Tip: Please retain the original box and
styrofoam pieces so that you can pack
the appliance securely, should you
need to transport it in the future.
The drip tray cover can be found in the
accessories pack.
Remove the protective film from the
drip tray cover and place it into the
lower panel.
Standard accessories
The following accessories are included
with your coffee machine:
- Stainless steel milk flask MB CM
(capacity 0.5l)
- Cleaning tablets for degreasing the
brew unit (starter set)
- Miele Descaling Tablets (starter set)
- Miele Descaling Cartridge
- Cleaning brush
- Vacuum cleaner attachment for
cleaning the ground coffee chute
Setting up and connecting the
coffee machine
Danger of overheating due to
insufficient ventilation.
If the coffee machine is not
sufficiently ventilated, the appliance
can overheat.
Please ensure that there is adequate
ventilation around the coffee
machine.
Do not cover the coffee machine
with dish towels, etc. while it is in
use.
If the coffee machine is installed in a
built-in niche, heat and moisture will
accumulate inside the alcove. This
can result in damage to the coffee
machine and/or cabinetry.
Do not install the appliance in a built-
in niche.
Please observe the following installation
instructions:
- The location of the appliance must be
dry and well ventilated.
- The ambient temperature of the room
in which the appliance is used must
be between +50°F and +100°F
(+16°C and +38°C).
Loading ...
Loading ...
Loading ...