Loading ...
Loading ...
Loading ...
Rinsing of circuits
These 2 functions are available anytime, except if the appliance requests a ‘CLEAN’ and/or ‘CALC’ cycle.
Rinsing out the coffee circuit:
Place a container under the coffee nozzles. Press the button – Fig. 6 quickly to start a coffee circuit rinsing
cycle, which will automatically stop after around 40 ml.
Rinsing out the steam circuit:
Place a container under the steam nozzle and press the button for 3 seconds to start a steam circuit rinsing
cycle, which will automatically stop after around 300 ml.
Appliance cleaning program, 3 times a year (total duration: about 13 minutes)
For hygienic reasons and to preserve all the best coffee flavor we recommend you to clean the coffee system
when the machine asks you to, about 3 times a year.
To perform this cleaning you will need:
– 1 KRUPS cleaning tablet
– 1 container of minimum 600ml several flows will follow one another
When to carry out this program?
When it is necessary to run a cleaning program, the appliance alerts you by flashing the CLEAN indicator light.
This program can only be accessed when the appliance requests it (approximately every 300 brews of coffee or
espresso). To comply with the warranty conditions, it is essential to perform the cleaning cycle when the appliance
alerts you.
Follow the order of operations carefully Use only KRUPS cleaning tablets (available on our KRUPS.com store)
How to start the automatic cleaning program?
1. Start the cleaning program by pressing the button. The CLEAN indicator becomes solid and the and
indicators flash.
2. Remove, empty, clean and replace the coffee grounds collector Fig 21-22 The indicator light go off.
3. Remove, empty, clean and replace the drip tray Fig 23.
4. Fill and replace the water tank.
5. Place the 600 ml container under the coffee nozzles Fig 24.
6. Open the maintenance hatch Fig 25.
7. Insert the KRUPS XS3000 cleaning tablet into the cleaning chute Fig 26.
8. Press the button to start the cleaning cycle
9. The cleaning phase (about 13 min) starts. Several waters flows follow one another in several phases without
any necessary intervention. They allow the device to be rinsed and the cleaning residue to be removed.
10. The cleaning cycle is finished when the light stays on and the CLEAN light goes out, empty the drip tray.
Your device is ready to be used.
Important :
You do not have to run the cleaning program as soon as the appliance requests it, but you must do it reasonably
soon after. If cleaning is postponed, the alert message will remain displayed as long as the operation has not been
performed. if you unplug your machine or if you turn it off during cleaning or in the event of electrical failure, the
cleaning program will resume the current step at the time of the incident. It will not be possible to postpone this
operation: rinsing the water circuit is mandatory.
If there is not enough water in the water tank when you start the program, the light will come on to warn you. Add
the appropriate amount of water to the container and cleaning will continue automatically.
Loading ...
Loading ...
Loading ...