Loading ...
Loading ...
Loading ...
Steam button
Rinsing/servicing
BEVERAGE PREPARATION
TYPES OF COFFEE Number of cups possible
Possible volume settings
(ml)
Possible strength settings
RISTRETTO
1 20 to 30 ml
2 x 1
2 x2Oto30 ml in two cycle
s
ESPRESSO
1 30 to 70 ml
2 x 1
2 x 30 to 70 ml in two cycl
es
COFFEE or LUNGO
1 80 to 220 ml
2 x 1
2 x 80 to 220 ml in two cy
cles
BEFORE FIRST USE
Preparing the appliance
Pull out and fill the water tank – Fig. 1 and 2.
Put it back in place by pressing firmly and closing the lid again – Fig. 3.
Open the coffee bean container lid. Add the coffee beans – Fig. 4.
Close the coffee bean container lid again.
Do not fill the water tank with hot water, milk or any other liquid. If you turn on the appliance when the water
tank is not in place or not correctly filled (under the “min.” level,), the light will come on and making an
espresso
or a cup of coffee will be made impossible.
NEVER PUT GROUND COFFEE IN THE COFFEE CONTAINER.
It is recommended that you do not use oily, caramelised or flavoured coffee beans for this appliance. These kinds
of beans may damage the appliance.
Check that the coffee beans do not contain any foreign particles such as grit, as any damage caused by the
presence of foreign particles will invalidate the guarantee.
Do not put water into the coffee bean container.
Remember to fit the drip tray to avoid wastewater flowing onto the work surface and staining it or scalding you.
Check that your water tank is clean.
Initialization cycle – total duration: around 3 minutes
Turn on the appliance by pressing the button – Fig. 5. The light is constant. Put a container with a
minimum capacity of 0.6 liters underneath the two coffee outlets and steam nozzle. Press the – Fig. 6 button:
the appliance starts the initialization cycle for rinsing off the steam and coffee circuits. The light flashes. The
cycle is finished when the light becomes constant. The appliance is now ready to use.
It is preferable to rinse the 2 circuits out at least once after the appliance has not been used for several days. Each
time you plug your appliance in, it will carry out an initialization cycle.
Loading ...
Loading ...
Loading ...