Loading ...
Loading ...
Loading ...
The coffee dispenses too slowly.
Turn the coffee fineness dial to the right to make the gr
ounds cotrser (this could also depend on the type of c
offee used).
Run one or several rinsing cycles.
Change the Claris Aqua Filter System cartridge (see ‘I
nstating the filter).
The water/steam is not dispensed normal?), from the s
team nozzle.
At the beginning or end of making a ink. the steam
nozzle may drip slightly.
The coffee fineness dial is difficult to turn. Only change the grinder setting when it is running.
The espresso or coffee is not hot enough.
Change the coffee temperature setting. Warm the cup
by rinsing it with hot water before making the drink.
The coffee is too lightly coloured or too weak
Avoid using oily caramelized or flavored coffee. Check
the bean has ii it that coffee container coffee and is dis
pensing correctly.
Decrease the drink volume. increase the ink strength.
Turn the coffee fineness dial to the left to make the gro
unds finer.
Make the drink in two cycles by using the 2 cups functi
on.
The appliance is not producing coffee.
A problem has been detected during the preparation o
f the drink.
The appliance has restarted automatically and is
ready for a new cycle.
Why can I not start the descaling or cleaning program?
Why does my appliance not request to be descaled or
cleaned?
The appliance only requests tocleanedionce it has ma
de several types of
requests a descaling cycle once it has made a certain
number of drinks using steam.
A power failure occurs during a cycle.
The appliance is automatically restarted when the pow
er is switched back on.
Coif Coffee flows behind the coffee nozzles.
Pour cold or room-temperature water into the tank. Re
-duce the temperature level.
The appliance is working but no liquid comes out.
Check that the water tank is in the correct position and
that the cord is not jammed between the appliance an
d the water tank.
Loading ...