Loading ...
Loading ...
Loading ...
Use
31
EN
Minute timer on cooking zones
To activate additional minute timers after at
least one cooking zone has been activated:
1. Select a power level.
2. Follow the same procedure as for an
independent timer.
The symbol appears above the
cooking zone display to indicate that the
zone is timed.
3. the timer will start a few seconds after the
last selection was made.
4. When the time has elapsed, a series of
beeps will be emitted; press the timer
area to silence them.
Modifying and deactivating minute timer
on cooking zones
1. Use the button to activate the
cooktop.
2. Select the cooking zone to modify.
3. Press the timer display to reset the
countdown following the relative
instructions.
4. To reset the timer, simply set both digits of
the timer to zero.
Recall Function
If the appliance has been switched off
unintentionally, carry out the following
procedure within 6 seconds:
1. Switch on the appliance.
• The icon starts to flash.
2. Immediately press the segment of the
scroll bar directly below the icon to
restore the functions that were previously
active.
NOTES: This function allows you
to set additional independent
timers at the same time, the number
of which depends on the number
of cooking zones available.
NOTE: This function is used to
restore some functions that have
already been started after the
appliance has been switched off
unintentionally.
NOTE: This function restores the
cooking zones, timer and rapid
heating functions. No other
functions will be restored.
Loading ...
Loading ...
Loading ...