Loading ...
Loading ...
Loading ...
Specifications
DSO5000 Series Digital Storage Oscilloscope User Manual 67
Output Voltage,
typical
About 5Vpp into ≥1MΩ load
Frequency, typical 1kHz
Power Supply
Supply Voltage
100-120VAC
RMS
(±10%), 45Hz to 440Hz, CATⅡ
120-240VAC
RMS
(±10%), 45Hz to 66Hz, CATⅡ
Power Consumption <30W
Fuse 2A, T rating, 250V
Environmental
Operating: 32Ⅱ to 122Ⅱ (0Ⅱ to 50Ⅱ)
Temperature
Nonoperating: -40Ⅱ to 159.8Ⅱ (-40Ⅱ to +71Ⅱ)
Cooling Method Convection
+104℉ or below (+40℃ or below): ≤90% relative humidity
Humidity
106Ⅱ to 122Ⅱ (+41Ⅱ to 50Ⅱ): ≤60% relative humidity
Altitude Operating and Nonoperating 3,000m (10,000 feet)
Random Vibration
0.31g
RMS
from 50Hz to 500Hz, 10
minutes on each axis
Nonoperating
2.46g
RMS
from 5Hz to 500Hz, 10
minutes on each axis
Mechanical Shock Operating 50g, 11ms, half sine
Mechanical
Length 313mm
Height 142mm
Size
Depth 108mm
Weight
exclusive of packing and
accessories
2.08Kg
Length 385mm
Width 200mm
Packing
Height 245mm
Gross Weight inclusive of all accessories
约 2.5Kg
8.2 Accessories
All the following accessories are available by contacting your local HANTEK distributor.
Standard Accessories
Sketch Description
X1, X10 two passive probes. The passive probes have a 6MHz
bandwidth (rated 100Vrms CAT III) when the switch is in the X1
position, and a maximum bandwidth (rated 300Vrms CAT II) when
the switch is in the X10 position. Each probe consists of all
necessary fittings.
Loading ...
Loading ...
Loading ...