Loading ...
Loading ...
Loading ...
Basic Operation
DSO5000 Series Digital Storage Oscilloscope User Manual 41
The oscilloscope displays Min, Mean and Positive Width automatic
measurements.
Rising Edge Display the rising edge.
Falling Edge Display the falling edge.
Undo Setup Let the oscilloscope recall the previous setup.
5.6.2 Help
Push the HELP button to display the Help menu which provides topics covering all the menu
options and controls of the oscilloscope. For detailed information about the Help system, refer to
Section 2.2.
5.6.3 Default Setup
When you push the DEFAULT SETUP button, the oscilloscope will display the CH1 waveform and
remove all the others. When you are at the default setup, press F1 to Undo Preset. Then the
oscilloscope returns to the status before default setup. The table below gives the options, buttons
and controls that change settings at default setup.
Menu or System Option, Button or Knob Default Setting
(Three mode options) Normal
Averages 16
Acquire
Run/Stop Run
Type Off
Source CH1
Horizontal (amplitude) ±3.2div
Cursor
Vertical (time) ±4div
Type Vectors
Persist Off
Display
Format YT
Window Mode Single-window
Trigger Knob Level
Position 0.00s
Horizontal
SEC/DIV 200µs
Operation —
Source CH1-CH2
Math
Position 0div
Vertical Scale 20dB
FFT Operation
Source CH1
Window Hanning
FFT
FFT Zoom X1
Source CH1
Measure
Type None
Type Edge Trigger (Edge)
Source CH1
Loading ...
Loading ...
Loading ...