Loading ...
Loading ...
Loading ...
Basic Operation
DSO5000 Series Digital Storage Oscilloscope User Manual 34
to a known setup.
See below for waveform menus.
Note: The oscilloscope will save the current settings if you wait 5 seconds after the last
modification, and it will recall these settings the next time you power on the oscilloscope.
5.5.2 MEASURE
Push the MEASURE button to perform auto measurements. There are 11 types of measurements
and up to 8 can be displayed at a time.
Turn the V0 knob to select an unspecified option. Press V0 or F6 when the red arrow icon stops on
it. Then the following menu appears.
Options Settings Comments
Source
CH1
CH2
Select the measure source.
Measurement
Type
Frequency Calculate the waveform frequency by measuring the first cycle.
Period Calculate the time of the first cycle.
Mean Calculate the arithmetic mean voltage over the entire record.
Pk-Pk
Calculate the absolute difference between the greatest and the
smallest peaks of the entire waveform.
Cyc RMS
Calculate the actual RMS measurement of the first complete
cycle of the waveform.
Min
Examine the waveform record of all points in the current
window and display the minimum value.
Max
Examine the waveform record of all points in the current
window and display the maximum value.
Rise Time
Measure the time between 10% and 90% of the first rising
edge of the waveform.
Fall Time
Measure the time between 90% and 10% of the first falling
edge of the waveform.
Positive Width
Measure the time between the first rising edge and the next
falling edge at the waveform 50% level.
Negative Width
Measure the time between the first falling edge and the next
rising edge at the waveform 50% level.
Off Do not take any measurement.
Use the knob V0 or the functional keys F3, F4 to select the type of measurement.
The white waveforms on the menu is
the recalled RefA waveform
At most 9 groups of
setups can be stored
Loading ...
Loading ...
Loading ...