Loading ...
Loading ...
Loading ...
9
Note
To guarantee positioning sensitivity and accuracy, make sure there are no appliances
of high power consumption, electronic interference source (fan or air-conditioning
compressor) or obstacle within 1 meter radius around the GPS antenna.
Step 2 Pull GPS antenna through the antenna hole at the top of the vehicle to the inside of the
vehicle, and connect the GPS antenna.
The GPS antenna cable exit hole shall meet the following requirements:
The inner hole cannot be more than Ø10mm.
Waterproof.
Easy to replace and maintain the antenna.
Figure 1-11
1.2.2.2 Inside Installation
If it is difficult to do the waterproof job or the cabling, you can install the antenna inside of the
vehicle.
Please select the installation position. Usually we recommend the antenna is at the instrument
pane near the window shield and the GPS antenna is facing to the air to enhance signal
intensity. See Figure 1-12.
Loading ...
Loading ...
Loading ...