Loading ...
Loading ...
Loading ...
A window automatically opens and displays the USB storage device.
6. Right-click the USB device and select Map network drive.
7.
Select the drive letter to map to the new network folder.
8. Click the Finish button.
The USB storage device is mapped to the drive letter that you specified.
9.
To connect to the USB storage device as a different user, select the Connect using
different credentials check box, click the Finish button, and do the following:
a. Type the user name and password.
b. Click the OK button.
The USB storage device is mapped to the drive letter that you specified.
Access a Storage Device That Is Connected
to the Extender From a Mac
From a computer or device on the network, you can access a storage device that is
connected to the extender.
To access the device from a Mac:
1. Insert your USB storage device into a USB port on your extender.
2.
If your USB storage device uses a power supply, connect it.
You must use the power supply when you connect the USB storage device to the
extender.
When you connect the USB storage device to the extender USB port, it might take
up to two minutes before it is ready for sharing. By default, the USB storage device
is available to all computers on your local area network (LAN).
3. On a Mac that is connected to the network, select Go > Connect to Server.
4.
In the Server Address field, enter smb://readyshare.
5. When prompted, select the Guest radio button.
If you set up access control on the extender and you allowed your Mac to access the
network, select the Registered User radio button and enter admin for the name
and password for the password. For more information about access control, see
View connected devices on page 25.
6. Click the Connect button.
User Manual59Share USB Storage Devices
Attached to the Extender
Nighthawk AX8 8-Stream WiFi 6 Mesh Extender
Loading ...
Loading ...
Loading ...