Loading ...
Loading ...
Loading ...
User's Manual
80
Table 4-29 Description of general parameters
Parameter Description
Brightness
●
Both the darker areas and the brighter areas will be changed together
when adjusting the brightness.
●
The image might become blurry when the value gets bigger. The
recommended range is 40–60, and the available range is 0–100.
●
It is 50 by default. The larger the value, the brighter the image.
Contrast
●
The larger the value, the darker the dark area, and the more exposed the
bright area.
●
The image might become blurry when the value gets smaller. The
recommended range is 40–60, and the available range is 0–100.
●
It is 50 by default. The larger the value, the stronger the contrast.
Saturation
●
The saturation value does not change the overall image brightness.
●
The larger the value, the more saturated the image. The recommended
range is 40–60, and the available range is 0–100.
●
It is 50 by default.
Mode
●
Color
: The image is always colored.
●
Auto
: When the brightness is higher than the preset value, the image
automatically changes to color. When it is below the preset value, the
image changes to black and white.
●
B/W
: The image is always black and white.
ICR Switch
●
Auto
: You need to pre-set the brightness in this mode. When the ambient
brightness is higher than the preset value, the polarizer will start to work.
●
Polarizer
: The polarizer is always running. Applicable to scenarios with
high brightness.
●
IR Mode
: Applicable to scenarios with low brightness.
Ambient
Brightness
The ambient brightness of ICR switch.
This parameter is available only when you set
ICR Switch
to
Auto
.
4.5.2.1.2 Configuring Shutter
You can configure shutter mode, exposure mode, and gain mode.
Step 1 Select
Setting
>
Camera
>
Image
>
Shutter
.
Loading ...
Loading ...
Loading ...