Loading ...
Loading ...
Loading ...
User's Manual
54
You can also click the icon next to
Lane Line
or
Detection Line
to delete the
corresponding lines on the image.
2. Click
Lane Line
or
Detection Line
, and then draw lines on the image.
When a vehicle reaches a detection line, the Device takes a snapshot of the vehicle.
●
You can also adjust lane lines to match the actual lane lines.
1. Select
Edit Line
, and then select a lane from the list.
2. Drag to adjust the lane lines and detection lines according to the actual situation.
Figure 4-17 Lane configuration
Step 3 Set
Lane Direction
and
Traffic Flow Direction
for the selected lane.
●
Lane Direction
: The direction of the lane line on the image must be the same as the
travelling direction of vehicles.
●
Traffic Flow Direction
: The direction of traffic flow, which is used for traffic flow
analysis.
Step 4 Click
Auto Drawing
, and then the system automatically draws lane lines. You can adjust
the auto lines as needed.
Install the plug-in before using the
Auto Drawing
function.
Step 5 Double-click the selected lane on the list under
Left Lane Line
,
Right Lane Line
, or
Lane
Type
to change the lane lines and lane type as needed.
●
Click
to display or hide the corresponding lane lines on the image.
●
Click to select a lane for the Device to monitor.
Step 6 Click
Save
.
Lane Properties
Step 1 Select
Setting
>
ITC
>
ANPR Snapshot
>
Violation Snapshot
.
Step 2 Select a lane from the list in the
Lane Config
section.
Step 3 In the
Lane Property
section, configure lane properties.
Loading ...
Loading ...
Loading ...