Loading ...
Loading ...
Loading ...
User's Manual
68
Table 4-19 Description of vehicle detection parameters
Parameter Description
Area Line The region of detection.
Vehicle Area The region for detecting traffic flow.
Calibration Area The region for analyzing traffic flow.
Line Segment Calibration
Used to verify the accuracy of calibration results.
Click
Line Segment Calibration
to draw the calibration segment
in the calibration area, enter the actual length of the calibration
segment in
Length
, and then click
Calibration Verification
.
Calibration Verification Used to verify the accuracy of calibration results.
Step 3 Click
Save
.
Other Configuration
Step 1 Select
Setting
>
ITC
>
E Police
>
Violation Snapshot
.
Step 2 In the
Other Config
section, configure the parameters.
Figure 4-34 Other configuration
Table 4-20 Other configuration
Parameter Description
Capture and Flash Linkage
●
General Mode
: Recommended for ANPR
mode.
●
Snapshot Line Mode
: Recommended for
E-police mode.
Take First Snapshot for Running a Red Light
●
Before Stop Line
: The first snapshot of
running a red light is taken before the stop
line.
●
Over Front Line
: The first snapshot of
running a red light is taken over the front line.
Max Speed
If the speed of a vehicle exceeds this value, the
system automatically changes the vehicle speed
to a random value in the normal range.
Pixels
Click
Draw Target
, and then draw a rectangular
area on the image to show the pixel size of the
area.
Step 3 Click
Save
.
Loading ...
Loading ...
Loading ...