Loading ...
Loading ...
Loading ...
User's Manual
64
Line type Description
Left Turn Division
Used to judge whether a vehicle is turning left. It triggers the third capture
of the vehicle running the red light or traveling on the wrong lane.
Right Turn
Division
Used to judge whether a vehicle is turning right. It triggers the third capture
of the vehicle running the red light or traveling on the wrong lane.
Waiting Area
Boundaries
The end line of the waiting area. Going beyond it will be regarded as
running the red light.
Step 4 Click
Auto Drawing
, and then the system automatically draws lane lines. You can adjust
the auto lines as needed.
Install the plug-in before using the
Auto Drawing
function.
Step 5 Double-click the selected lane on the list under
Left Lane Line
,
Right Lane Line
, or
Lane
Type
to change the lane lines and lane type as needed.
●
Click
to display or hide the corresponding lane lines on the image.
●
Click to select a lane for the Device to monitor.
Step 6 Click
Save
.
Lane Properties
Step 1 Select
Setting
>
ITC
>
E Police
>
Violation Snapshot
.
Step 2 Select a lane from the list in the
Lane Config
section.
Step 3 In the
Lane Property
section, configure lane properties.
Figure 4-29 Lane property
Table 4-16 Lane property description
Parameter Description
Road Direction The direction of the road.
Passing Direction The geographical direction of the lane.
Upload Image of
●
All Violations
: Captures and reports all violations of vehicles on the
lane.
●
Violation with Highest Priority
: If a vehicle triggers multiple
violations, the Device reports only the event with the highest priority.
Road Code The code of the road.
Road Section Code The code of the road section.
Step 4 Click
Save
.
Loading ...
Loading ...
Loading ...