Loading ...
Loading ...
Loading ...
User's Manual
39
4 Webpage Operations
4.1 Introduction
Before you use the webpage of the Device, you must initialize the Device and configure its settings
on the webpage. The following sections introduce the initialization and webpage functions of the
Device.
The actual webpage might vary depending on the model you purchased and the version of software.
The figures in this manual are only for reference.
4.1.1 Initialization
The Device is delivered in the uninitialized state. You must initialize the Device before you can use
the webpage of the Device.
Step 1 Use ping X.X.X.X (IP address of the Device) command to check whether the network is
connected.
Step 2 Open a browser, enter the IP address of the Device in the address bar, and then press the
Enter key.
Make sure that the IP address of the PC and that of the Device are on the same network
segment.
Step 3 In the
Device Initialization
dialog box, enter your new password.
Step 4 Select
Email Address
, and then enter your email address. This helps you reset your
password when you forgot your password.
Step 5 Click
Next
.
Loading ...
Loading ...
Loading ...