Loading ...
Loading ...
Loading ...
User's Manual
III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the Device, hazard prevention, and
prevention of property damage. Read carefully before using the Device, and comply with the
guidelines when using it.
Transportation Requirements
●
Pack the Device with packaging provided by its manufacturer or packaging of the same quality
before transporting it.
●
Transport the Device under allowed humidity and temperature conditions.
Storage Requirements
Store the Device under allowed humidity and temperature conditions.
Installation Requirements
●
Do not connect the power adapter to the Device while the adapter is powered on.
●
Strictly comply with the local electric safety code and standards. Make sure that the ambient
voltage is stable and meets the power supply requirements of the Device.
●
Do not connect the Device to 2 or more kinds of power supplies, to avoid damage to the Device.
●
Use the accessories suggested by the manufacturer. Installation and maintenance must be
performed by qualified professionals.
●
When using a laser beam device, avoid exposing the surface of the Device to laser beam
radiation.
●
Do not install the Device in an environment that has a large amount of metal, advertising boards,
walls or electromagnetic interference. Otherwise, the performance of the Device might be
affected
●
Do not install 2 devices with the same frequency in the same environment. Otherwise, the Device
might not work properly.
●
Personnel working at heights must take all necessary measures to ensure personal safety
including wearing a helmet and a safety belt.
●
Do not place the Device in a place exposed to sunlight or near heat sources.
●
Keep the Device away from dampness, dust, and soot.
●
Put the Device in a well-ventilated place, and do not block its ventilation.
●
Use an adapter or cabinet power supply provided by the manufacturer.
●
The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Please note that the power supply requirements are subject to the device label.
●
The Device is a class I electrical appliance. Make sure that the power supply of the Device is
Loading ...
Loading ...
Loading ...