Loading ...
Loading ...
Loading ...
User's Manual
53
●
For details on configuration in
ANPR
, see "
4.5.1.2 ANPR Snapshot".
●
For details on configuration in
E-police
, see "
4.5.1.3 E Police".
Figure 4-15 Select a smart plan
Step 3 Click
Save
.
When you switch between the smart plans, the system instructs you to restart the Device.
Figure 4-16 Notification
Step 4 Click
OK
, and then log in to the webpage after the Device is restarted.
4.5.1.2 ANPR Snapshot
4.5.1.2.1 Configuring Violation Snapshot
Configure the video detection parameters for detecting traffic violations.
Select a lane from the list in the
Lane Config
section, and then all configurations on the
Violation
Snapshot
tab are for this lane.
Lane Parameters
Configure the information of the lanes the Device is monitoring, such as drawing lane lines on the
image, selecting the lane direction, and setting the lane line type according to the actual situation.
Step 1 Select
Setting
>
ITC
>
ANPR Snapshot
>
Violation Snapshot
.
Step 2 In the
Lane Config
section, configure the lane lines.
●
If the default lane lines on the image do not meet the detection requirements, you can
draw new lane lines.
1. Select a lane from the list, and then delete the lane lines by clicking .
Loading ...
Loading ...
Loading ...