Loading ...
Loading ...
Loading ...
Basic Operation
DSO1000S Series HandHeld Oscilloscope User Manual 39
and the voltage or current of CH2 determines the Y
coordinate (vertical). For detailed information, refer to
descriptions on XY format in the following text.
Contrast
0-15 16 ranks adjustable.
Grid
Dotted line
Real line
OFF
Off only displays the horizontal and vertical
coordinates at the center graticule on the screen.
Grid Intensity
0-15 16 ranks adjustable.
Refresh Rate
Auto
50 Frames
40 Frames
30 Frames
Wave Bright
0-15 16 ranks adjustable.
BL Keep
5s,10,30s,60s,Unlimited
Menu Keep
5s,10,30s,60s,Unlimited
5.6 Fast Action Buttons
AUTO: Automatically set the oscilloscope controls to generate a usable display of the input signals.
Refer to the following table for relative content.
RUN/STOP: Continuously acquire waveforms or stop the acquisition.
5.6.1 AUTO
Autoset is one of the advantages digital oscilloscopes have. When you push the AUTO button, the
oscilloscope will identify the type of waveform (sine or square wave) and adjust controls according
to input signals so that it can accurately display the waveform of the input signal.
Functions
Settings
Acquire Mode
Adjusted to Normal or Peak Detect
Cursor
Off
Display Format
Set to YT
Display Type
Set to Vectors for an FFT spectrum; otherwise, unchanged
Horizontal Position
Adjusted
TIME/DIV
Adjusted
Trigger Coupling
Adjusted to DC, Noise Reject or HF Reject
Trigger Holdoff
Minimum
Trigger Level
Set to 50%
Trigger Mode
Auto
Trigger Source
Adjusted
Trigger Slope
Adjusted
Trigger Type
Edge
Trigger Video Sync
Adjusted
Trigger Video Standard
Adjusted
Vertical Bandwidth
Full
Loading ...
Loading ...
Loading ...