Loading ...
Loading ...
Loading ...
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
Operating Instructions
85
70458301ENR6
UniLinc Control
UO and RU Control Suffixes
1. Press the (
)or(
) keypad to change cycles. The
center highlighted position is the selected cycle.
To customize a cycle, refer to the Programming
Manual.
2. Press START to Start selected cycle.
IMPORTANT: If the loading door or lint panel
door is opened during the cycle, the heating system
will shut off and the motor will stop. To restart the
cycle, both doors must be closed and the
START pad must be pressed.
3. When the cycle is complete, open door and
remove laundry.
NOTE: This machine includes an anti-wrinkle/
extended tumble feature. After the drying cycle is
complete, the cylinder will tumble without heat
every few minutes. The intermittent tumbling will
continue for one hour or until the door is opened.
After an hour the machine enters delayed tumble
and will tumble for two minutes every hour for up
to 18 hours or until the door is opened.
Figure 49
TMB1276C
TMB1276C
WARNING
To prevent the risk of fire, remove laundry
immediately in case of power failure.
W779
Loading ...
Loading ...
Loading ...