Loading ...
Loading ...
Loading ...
EZ-300 Owner’s Manual
56
Reference
Connecting to Other Devices
You can output the sound of an audio device, such
as a smartphone, with the built-in speakers of this
instrument by connecting it via a cable. This lets you
play the keyboard along with playback of your music
player.
1
Turn off the power for both the external
audio device and this instrument.
2
Connect the audio device to the instru-
ment’s [AUX IN] jack.
Use the cable (no resistance) which has the ste-
reo-mini plug at one side for connecting to this
instrument and the plug matching the output jack
of the external audio device at the other side.
3
Turn on the external audio device, then
this instrument.
4
Play back the connected external audio
device.
The sound of the audio device is output through
the speakers of this instrument.
5
Adjust the volume balance between the
external audio device and this instrument.
Adjust the audio playback volume on the audio
device, then adjust the entire volume by rotating
the [MASTER VOLUME] control of the instru-
ment.
6
Play the keyboard along with the sound
of the audio device.
You can cancel or lower the volume of the melody
part of audio playback. For details, refer to page
58.
7
After finishing the performance, stop
playback of the audio device.
• Before connecting, turn off the power of both this instrument and the external audio device. Also, before turning the power on or
off, make sure to set all volume levels to minimum (0). Otherwise, damage to the devices, electrical shock, or even permanent
hearing loss may occur.
CAUTION
Playing an External Audio Device
with the Built-in Speakers
• To avoid damage to the external audio device and this
instrument, first turn on the power to the external device,
and then to the instrument. When turning off the power,
first turn off the power to the instrument, and then to the
external device.
• If you are using a computer or a smart device such as a
smartphone or tablet, you can also connect it to the [USB TO
HOST] terminal (see “Connecting to a Computer” on page
57).
NOTICE
NOTE
Audio device
(Smartphone. etc.)
Stereo-mini
plug
• You can adjust the level of the input from the external
audio device by calling up “AuxInVol” via Function num-
ber 043 (page 62) and using the [0]–[9], [+/YES], [-/NO]
buttons. If you increase the volume to more than 50, the
audio device sound may be distorted.
NOTE
Loading ...
Loading ...
Loading ...