Loading ...
Loading ...
Loading ...
6
1
2
3
4
5
67
8
9
LIGHT
TIMER
CLEAN
ON/OFF
A. Water dividing pipe ：with nine little holes, water will flow out from these little holes. And if no
water flows out, can be disassembled and cleaned.
B. Evaporator (ice-making module)
C. Ice full de tecting board: Use to detect the inner cabinet is full of ice or not, and to check the the
ice-harvest process is over or not.
D．Water tank：
E．Water supplying pipe：
F．Cover board on the right side of the evaporator：
G．Water level switch installing plate：
H．Water drain pipe of the w
ater tank：when ice-making, this pipe should be clamped in the slot of
the water tank wall; And when draining, this pipe should be pulled out.
I．Water pump：
J．Water level detect ing switch
3) Operation panel
A．LCD display window
1、Unit ON or OFF state symbol: When the unit is turned off(standby mode), this symbol
flashes, and when the un it is working, the symbol will keep lighting on.
2、Ambient temperature an d ice-making countdown time display
3、Ice-makin g setting and Time
r setting display
4、Error code：E1 means that the ambient temperature s ensor is faulted
E2 means that ice-making process is abnormal；
5、Light symbol：When this symbol displays, the LED light inside the cabinet will be on；
6、Water flowing and water absenc e symbol: If the arrow of this symbol flashes, means the
water is flow in from main water suppl y; And if the whole symbol keeps on, means there is no
water from main water supply.
7、Ice-full display: When the ice storing cabine
t is full of the ice cube, this symbol will display,
and the unit will stop ice-m aking process.
8、Ice making and harvest display：When the ice cube symbol keep rotation, means the unit
is making the ice; And if the symbol flashes, m eans the unit is during the ice harvest process.
9、Self-cleaning display.
B．“LED light” button : To turn on or turn off the internal LED light;
Note: Keep pressing this button for more than 5 seconds, it is to change the ambient
temperature unit between
Fahrenhei t degree and Centigrade degree.
C．“Timer/Clean”button：Quickly press this button once, to enter the Timer setting program; And
press this button for more than 5 seconds, to let the unit enter the Self-Clean ing
program.
Loading ...
Loading ...
Loading ...