Loading ...
Loading ...
Loading ...
25
ERROR INDICATOR
a) Ambient temp sensor breakdown----- Display E1 in digital window.
b) The machine not make ice or the gas leak ----Display E2 in digital window
c) Magnetic control switch cut off----
“
Full
”
light will be on when plugging on or just turning
on the unit. And it will delete the breakdown display if this switch is electric shorted.
d) During the ice making process, press the
“
ON/OFF
”
button for more than 5 seconds,
the unit
Start to enter the ice harvest program. And after the ice harvest program,it continue to
enter the ice making process.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
Ice cube is very thin
Ambient temperature is too
high
Move the unit to low temperature space, or
lengthen the time of each ice making
cycle.
Air circulation around the unit
is not goog
Make sure there is more than 20CM space
between the unit back & front and the
obstacle
Ice cube is too thick
Ambient temperature is too low
Reduce the time of each ice making cycle.
“ICE-FULL” symbol is
on
The ice storage bin is full of the
ice cube.
Take out some ice cube
Ice making cycle is
normal, but there is no
ice cube produced
The temperature of ambient, or
water in water tank is too high
Move to the place with temperature lower
than 90Fahrenheit
,
, and change to the low
temperature water
Refrigerant leakage, E2 error
code display
Need the technical serviceman to maintain
Cooling system tube is clogged
Need the technical serviceman to maintain
Loading ...
Loading ...