Loading ...
Loading ...
Loading ...
20
your water quality. And drain the water more frequently, the unit and its water pump can
work much longer.
4.When there are ice cubes on the surface of the evaporator, but can’t fall off easily, do
not use the mechanical substance to remove it by force; Only press the “ON/OFF” button
for more than 5 seconds, the unit will enter the ice melting process, after some while, the
big ice-cubes will fall down, then turn off the unit and unplug the power cord to clean the
surface of the evaporator.
5. For the water tank and ice-full detecting plate
Also the water tank and the ice-full detecting plate is very important to keep your ice cube
hygienic. Put mixture of neutral cleaner & water into a clean water jet, then spray to all
the inner surface of tank & the ice detecting plate. Wipe these surfaces as far as possible
with a clean cloth. And then, spray the surfaces with clean water, wiping with a dry clean
cloth. Then drain out the cleaned water in the water tank by pulling out the Water drain
pipe of the water tank indicating “H” in above illustration. When all of the cleaned water
has been drained out, to install back the water drain pipe of the water tank.
Suggestion: After cleaning the interior parts and install back to its
respective position, and return machine to work, discard first batch of
ice.
Ice Making Assembly System Cleaning by Using Nu-Calgon Nickle Safe
Ice-machine Cleaner (Better using automatic water supplying)
Minerals that are removed from water during the freezing cycle will eventually form a hard
scaly deposit in the water system. Cleaning the system regularly helps remove the mineral
scale buildup. How often you need to clean the system depends upon how hard your
water is. With hard water of 4 to 5 grains/liter, you may need to clean the system as often
as every 6 months.
1. Turn off the ice maker. Keep the ice maker connect to the main water supply and
Loading ...
Loading ...
Loading ...