Loading ...
Loading ...
Loading ...
14
I :Bo ttled water method supplying symbol; O: Automatic water supplying symbol;
Arrow of this symbol flashes, means the water is flowing into the water tank.
If this whole symbol keeps displaying, means no main water s upplying at present.
Ice-cube symbol, when it rotate, mean s unit is making th e ice cube; and it flashes,
means the unit is in ice harvest process.
℃ Centigrade(ambient t emperature
） H
unit o f hour
（
setting the timer
）
M unit of
minute
（
ice-making setting and countdown time
）
1. Plug on the main power supply plug, then press “ON/OFF” button on the co ntrol panel
to begin the ice making cycle. The unit O N/OFF state symbol will keep ligh ting on, the left
number in the LCD display window displays the p re sent a mb ient temperature, and the
right number displays the present ice-making setting, and the ice-cube symb ol rotates.
When the left number change to flash, then the number mean s the countdown time to
complete one ice making cycle.
2. Each ice m aking cycle will last about 11 to 20 minutes, depending on the ambient
temperature and the water temperature. And for the first time, according to the initial water
temperature, ice-making last time will be a little longer.
3. When the ice-making process is over, then switch to ice-harvest process. During the
ice-harvest process, the ICE cube symbol change rotating to flash. At same time, the
arrow on the manual f illing water symbol will start to flash, t he water will flow into the water
tank again till the floating ball of water level switch rises up to the highest position, then the
water stop flowing and the whole manual filling water symbol will disa ppear.
When the ice-harvest finish, the Ice-full detecting plate will rotate downward on ce,
then recover to the original position and enter to the next ice-making process.
If after the rotation of the Ice-fu ll detecting p late, it is pressed by the ice cube and can’t
recover to the original position, means the the ice bin is full of the ice cube and it will
stop making the ice automatically.
4. When the “ICE-FULL ” symbol display is on, t he unit stops running. And if you move
away the ice cu be, the unit will start to make the ice cube again. B ut it will restart
only after 3 minutes interval of co mp re ssor ru nning.
5. During the ice-making process, press the “+” or “-” button to ad just t he ice-making
process du ra tion period length,
then to change the thickness of the ice cube. Press
Loading ...
Loading ...
Loading ...