Loading ...
Loading ...
Loading ...
11
CLEANING
CLEANING
YOUR
YOUR
ICE
ICE
MAKER
MAKER
BEFROE
BEFROE
FIRST
FIRST
USING
USING
Before using your ice maker, it is strongly recommended to clean it thoroughly.
1. Open the ice getting door.
2. Clean with diluted detergent, warm water and a soft cloth.
3.
Repeatedly clean the water contacting inner parts, use the water or the wet clothe to
scrub the relevant parts, then use the dry clothe to dry them.
4. you can pull the Water drain pipe of the water tank indicating “H” in above illustration to drain the
cleaned water in the water tank, then next to clean inner ice-storing cabinet, till all of inner parts are
cleanly, then drain out all of the cleaned water from the water drain port located at unit back
indicating “8”in above illustration. And must to reinstall back the water drain pipe of the water tank
and the cap of the unit water drain port, otherwise, the unit will not make the ice normally. And
suggest that you should discard the ice-cube made by th
e first ice making cycle after
cleaning.
5. The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm
water.
6. Dry the interior and exterior with a clean soft cloth.
WATER CONNECTION FOR YOUR ICE MAKER
Important: Be sure to use the new hose-sets supplied with the appliance to
connect to water mains and that old hose-sets should not be reused.
1、Connect the water supplying hose to the unit
Important: Be sure to use the new hose-sets supplied with the appliance to
connect to water mains and that old hose-sets should not be reused.
Option#1 Connect the water supplying hose to the unit
Step 1: First remove the clipper on the water inlet port for water supply
(indicated in the following illustration “A”) located at unit back,
Step 2: Insert the one end of the white water hose into the water inlet
port, and push inward complet
ely, and install back the clipper,
then water hose connection is completed.
2
、
Connecting the water dra in pi pe
Pull out the water drainage cap with black color (indicated C in above illustration), then connect
Take off the C clip
Put back the clip
First insert the short white
tube at least 15mm
STEP1: Peel off the tape
STEP2: Inser the short
white tube
PIC.1
Loading ...
Loading ...
Loading ...