Loading ...
Loading ...
Loading ...
15
the “+” or “-” button, the right digit will flash, the default set ting is zero, 1 minute will
add or decrease to each ice making process per each pressing of “+” or “-” button.
After 5 second o f setting, the new setting will be remembered by the system.
6. The bad water quality will ca use the bad quality of ice cube, and reduce the
transparency of the ice cube.
Automatic self-cleaning program
Start the self-cleaning program: After connecting all of the water pipe, plug o n t he
main power supply plug, then press
“
TIMER /CLEA N
”
button on control panel for more
than 5 seconds, to enter the Self-Cleaning program . And the “ ”symbol will always
be on during this p eriod, t he left digit will ind icate the left time. The total duration time is
20 minutes for one self-cleaning program .
Cancel the self-cleaning program: It takes about 20 minutes to complete one
self-cleaning pro gram. When th e program is over, the system will be in
standby mode automatically. And also you can p re ss the “ON/OFF” b utton on
control panel to cancel the self-cleaning program by force.
Timer setting operation
Delay time ra nge: 1-24 hours, Default time: 1 hour
How to set the ON-Timer: During the unit is in standby mode, press the “TIMER/CLEAN”
button to set th e ON-Timer. The “ ” symbol will start to be on, the number “1 ” above
the symbol will flash to d isplay the set delay t ime. During t he number flashing, press+
”、
“
-
”
button to change the delay time of the timer, 1 ho ur increasing or decreasing per each
pressing of “+” or “-” button. Five seconds after setting, your desired set ting will be
remembered.
How to cancel the ON-Timer: Press the “TIMER/TIMER” button, the number above the
“ ” symbol will flash to display the present delay time of your ON-Timer, and press
this button once again to cancel the Timer setting, also the “ ” symbol and the
number will disappear. And the second easy way to cancel the ON-Timer is to press t he
“ON/OFF” button, it will cancel the ON-TIMER setting by force.
How to set the OFF-Timer
：
When the unit is working, press the “TIMER/CLEAN” button
to set the OFF-Timer. The “
” symbol will start to be on, the number
“1” above the symbol will fla sh to display the setting delay time. During the
number flashing, press+
”、“
-
”
button to change the delay time of the timer,
1 hour increasing or decreasing p er each pressing of “+” or “-” button. Five
seconds after set ting, your desired setting will be remembered.
How to cancel the OFF-Timer: Press the “TIMER/TIMER” button, the number ab ove the
Loading ...
Loading ...
Loading ...