Loading ...
Loading ...
Loading ...
19
convenient to sanitize the bin after the ice making system h as been cleaned, and the
storage bin is empty.
1. Disconnect power to the unit.
2. Open the door a nd with a clea n cloth, wipe down the int erior with a sa nitizing
solution made of 28g of household bleach or chlorine and 7.5L of hot water (95℉ to
115℉)
.
3. Rinse thoroughly with clear water. The waste water will be drained out through the
drain pipe.
4. Reconnect power to t he unit.
The ice scoop should be washed regularly. Wash
it just like any other f ood container.
Ice Making Parts Cleaning
During the using, periodically to clean these main system of your ice-maker.
1. Repeat above step to clean the wat er tank and other in ner parts of the unit.
2. Especially, to the water dividin g pipe on the evaporator, when the compressor and
the water pump run normally, but if there is no water flowing out from the water dividing
pipe or the water flowing is very small, please discharge this water dividing pipe to cl
ean
carefully. Clean each little holes on the water dividing pipe displayed in the following
illustration, make sure each hole is not clogged by something, then install back to the
original location.
3.The length of clean ing p eriod is related t
o
Loading ...
Loading ...
Loading ...