Loading ...
Loading ...
Loading ...
8
Condition/Problem Things to Check Solution
If bike has batteries,
check Battery Indicator
on console or check
batteries.
Make sure batteries are installed correctly. If batteries are
correctly installed, replace with a set of new batteries.
Check Speed Sensor
Magnet position (requires
fan cover removal)
Speed Sensor Magnets should be in place on Fan assembly.
Check Speed Sensor
Assembly
Contact Customer Care for further assistance.
Console displays “err 1”
message
Check Console keypad for
stuck key
Contact Customer Care for further assistance.
Unit rocks/does not sit
level
Check leveler adjustment Leveling feet may be turned in or out to level bike.
Check surface under unit Adjustment may not be able to compensate for extremely un-
even surfaces. Move bike to level area.
Pedals loose/unit dicult
to pedal
Check pedal to crank
connection
Pedal should be tightened securely to crank arm. Be sure con-
nection is not cross-threaded.
Check crank arm to axle
connection
Crank arm should be tightened securely to axle. (Screw torque
= 60 N.m.)
Crank link to pulley
connection
If the left crank arm still feels loose with correct torque applied
and the crank link shaft is moving with the crank arm, replace
the crank link assembly.
Clicking sound when
pedaling
Check pedal to crank
connection
Remove pedals. Make sure there is no debris on threads, and
reinstall the pedals.
Check fan alignment
(requires fan cover
removal)
Refer to the “Adjust the Belt Tension” procedure in the Service
Manual.
Seat post movement Check locking pin Be sure adjustment pin is locked into one of the seat post
adjustment holes.
Check locking knob Be sure knob is securely tightened.
Handlebar arms click/tick
during movement
Check hardware Screws at the base of handlebar arms should be tightened
securely. (Screw torque = 40 N.m.)
Loading ...
Loading ...
Loading ...