Loading ...
Loading ...
Loading ...
25
4. Loosen and remove the screws that attach the Console to the Mast
and Water Bottle Holder. Set the screws safely aside.
NOTICE: Hold the Console so that it does not fall. This step may
require two people.
5. Carefully remove the Console and pull the cables out of the Mast
tube. Set it safely aside.
NOTICE: Do not crimp any cables.
6. Remove the Water Bottle Holder from the Mast. Set it safely aside.
7. Put the Water Bottle Holder in position on the replacement Mast.
8. Tie one end of the piece of string to the Console cable connectors.
Tie the other end to one of the screws from step 1. Use the weight of the
screw to route the cables through the replacement Mast tube.
NOTICE: Do not crimp any cables. Hold the Console so that it does
not fall. This step may require two people.
9. Install the replacement Console to the Mast. Untie the string from
the cables and screw. Connect the cables from the Mast and frame, and
install the Console/Mast assembly to the frame.
NOTICE: Do not crimp any cables. Hold the Console so that it does
not fall. This step may require two people.
10. Discard the old parts.
11. Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
Loading ...
Loading ...
Loading ...