Loading ...
Loading ...
Loading ...
29
Note: Your machine may not match the image. For reference only.
1. Place a static object (like a book or box) under the main frame near
the Stabilizer. The static object should not be compressible.
2. Using the 13mm wrench, loosen and remove the hex head bolt from
the old Leveler. Remove the Leveler foot and hardware from the Stabilizer,
and discard.
3. Install the replacement Leveler assembly. Hand tighten the hardware.
Turn the stabilizer feet to adjust until they are evenly balanced
andincontactwiththeoor.
Do not adjust the levelers to such a height that they
detach or unscrew from the machine. Injury to you or
damage to the machine can occur.
Make sure the machine is level and stable before you exercise.
4. Final Inspection
Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
Loading ...
Loading ...
Loading ...