Loading ...
Loading ...
Loading ...
31
Note: Your machine may not match the image. For reference only.
1. Using the 13mm wrench, loosen the Nuts (B) on the Seat bracket (A).
2. Remove the Seat from the Seat Post and set it
safely aside for reassembly.
3. Loosen and pull the Seat Post Adjustment Knob (C), and remove the
Seat Post. Set it safely aside.
NOTICE: This step may require two people.
4. Install the replacement Seat Post on the frame. Release the Seat
Post Adjustment Knob (C) to engage the locking pin. Be sure that the pin
is fully engaged and fully tighten the adjustment knob.
5. Attach the Seat to the Seat Post.
NOTICE: Be sure the Seat is straight and level. Tighten both nuts
(B) on the Seat bracket (A) to hold the Seat in position.
6. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
A
B
B
C
Loading ...
Loading ...
Loading ...