Loading ...
Loading ...
Loading ...
22
4. Loosen and remove the screws that attach the Console to the Mast
and Water Bottle Holder. Set the screws safely aside.
NOTICE: Hold the Console so that it does not fall. This step may
require two people.
5. Remove the Console and pull the cables out of the Mast tube so that
the string extends through the tube. Untie the string from the cables.
6. Tie the string end at the top of the Mast to the ends of the cables on
the replacement Console. Carefully pull the cables through the Mast tube.
NOTICE: Do not crimp any cables.
7. Install the replacement Console to the Mast. Untie the string from the
cables.
NOTICE: Do not crimp any cables. Hold the Console so that it does
not fall. This step may require two people.
8. Connect the cables from the Mast and frame, and install the Console/
Mast assembly to the frame.
NOTICE: Do not crimp any cables. This step may require two people.
9. Discard the old parts.
10. Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
Loading ...
Loading ...
Loading ...