Loading ...
Loading ...
Loading ...
22
En
No. Menu item (in the display) Setting value/range Explanation
17 Pot Mode Relative, Passthru, Jump*
This determines how the synthesizer reacts when you edit parameters
using its controls (knobs).
Because parameter values and their corresponding control positions are
saved with each program, changing programs will usually mean that the
current physical control positions don’t show the actual parameter values
for the program. For this reason, turning a control can cause a sound to
change suddenly as the value “jumps” to the physical knob’s position.
Use [Pot Mode] to set control/parameter response according to your
preference.
! Relative: The operating positions of the controls and the actual
parameter values change relatively.
! Passthru: When the operating position of a control coincides with the
actual parameter value, the parameter value will change according to
the control position.
! Jump: The actual parameter values change to the operating positions
of the controls instantly.
18 Alternative Tuning 1* to 17
Sets the built-in tuning mode.
! 1: Standard western chromatic tuning mode
! 2 to 17: Alternative tunings, including non-western, non-chromatic
tunings found in some ethnic and historical instruments.
For details, see “Alternate tuning list” (page 24).
19 Screen Saver Off, On*
Sets whether or not to have a screen saver.
20 Seq Jack Mode Pedal*, Trigger, Gate, Gate+Trigger
Sets the operation when a general foot switch is connected or audio
signals are input to [TRIGGER IN].
! Pedal: plays or stops the sequencer.
! Trigger: When the sequencer is On, the step advances one step each
time it receives a signal.
! Gate: When the unit receives a signal while you are touching the
keyboard, the unit gates or triggers the envelope.
Also, when the sequencer or arpeggiator is On, the unit plays or stops
according to the set BPM value.
! Gate+Trigger: When the unit receives a signal while you are touching
the keyboard, it gates or triggers the envelope.
Also, when the sequencer is On, the step advances one step each time
it receives a signal.
For operational details, see “Using with external equipment” (page 26).
21 Keys Sens 1 to 10 (4*)
Adjusts the touch sensitivity of the keyboard.
The TORAIZ AS-1’s keyboard is an electrostatic capacitive touch pad
and you can adjust the keyboard touch sensitivity to a player and use
environment using this setting.
! [1] is maximum and [10] is the minimum sensitivity.
22 Pedal Polarity Normal*, Reversed
Sets the polarity of the foot pedal connected to [TRIGER IN].
! Normal: Open
! Reversed: Closed
23 Basic Program –
Initializes the selected program.
24 Calibrate –
Calibrates Oscillator 1, Oscillator 2 and low-pass filter.
25 Reset Globals –
Initializes [GLOBAL SETTING].
26 Dump Prog –
Sends the settings of the selected program as a MIDI SysEx message.
27 Dump Bank –
Sends the settings of the programs in the selected bank as MIDI SysEx
messages.
28 Dump All Banks –
Sends the settings of the programs in all the banks as MIDI SysEx
messages.
*The setting when you purchased this unit.
Loading ...
Loading ...
Loading ...