Loading ...
Loading ...
Loading ...
11
En
Operation
2 Turn the [VALUE] control to change the number of
steps to be played back.
The unit plays the sequence repeatedly (loop playback) according to the
number of steps shown in the display.
! To change the number of steps, hold down the [SHIFT] button and
turn the [VALUE] control.
! If you select [Length] less than the number of steps of the recorded
sequence, the playback forcibly returns to the first step after playing
the step specified by [Length].
Example: When the number of steps in the recorded sequence is 20
and [Length] is set to [16 steps].
Step number
Number of steps
Recorded sequence
Entered notes
Loop playback range
The unit loops playback until the 16th step. Steps 17 to 20 are not
played, but the sequence pattern remains.
! If you select [Length] greater than or equal to the number of steps
of the recorded sequence, the unit plays the sequence pattern
repeatedly until it reaches [Length], then returns to the first step for
loop playback.
Example: When the number of steps of the recorded sequence is five
and [Length] is set to [16 steps].
Number
of steps
Loop playback range
Recorded
sequence
Entered notes
The unit plays the recorded five-step sequence pattern repeatedly
until the 16th step, then it forcibly returns to the first step to loop
playback.
! If you change the [Length] setting while playing a sequence, the
change will be reflected after the step specified by the previous
[Length] setting is played.
Changing the entered note setting
Each step has the following settings: [Note], [Vel], [Slew].
1 Turn the [PARAM/CATEGORY] control to display
the [Note], [Vel] or [Slew] parameter screen under
the [SEQUENCER] category of the step you wish to
change.
2 Turn the [VALUE] control to change the value of the
displayed parameter.
Changes in each parameter value are reflected instantly, regardless of
the playback/stop status of the sequence.
U5
Basic Program
Note 1
G
10
P27
SEQUENCER
120
BPM
:
U5
Basic Program
Vel 1 127
P27
SEQUENCER
120
BPM
:
U5
Basic Program
Slew 1
O
f f
P27
SEQUENCER
120
BPM
:
Using the slider
You can assign multiple parameters to the slider and dynamically
change the tone using the slider.
1 Turn the [PARAM/CATEGORY] control and choose
the parameter you wish to change using the slider
from the [SLIDER DESTINATION] category.
2 Turn the [VALUE] control to set the maximum value
of the parameter assigned to the slider.
3 Operate the slider.
! To make the slider hold its value even after you release your finger,
press the [LATCH] button so that the [LATCH] button turns on (lights
up).
Using the Quick Program function
The unit can assign up to 13 programs as Quick Programs to each
keyboard key and instantly recall them.
Assigning quick programs to the
keyboard keys
1 Press the [GLOBAL/WRITE] button.
The [GLOBAL SETTING] screen appears in the display.
2 Turn the [PARAM/CATEGORY] control to display the
[Quick Program] screen.
3 Turn the [VALUE] control to select a key to which
you wish to assign the quick program.
The numbers [Prog: 1] to [Prog: 13] correspond to the numbers on the
keyboard keys.
Prog: 2 Prog: 11
Prog: 1 Prog: 3 Prog: 12 Prog: 13
4 Press and hold the [SHIFT] button and turn the
[PROGRAM/BANK] control to select the bank number
that contains the program you wish to assign.
The bank number in the display changes.
! See step 3 in “Choosing and playing a program” (page 9) for how
to turn on/off the [SHIFT] button.
Prog:1
4
.
Q
uick
P
rogram
Ul P1
5 Turn off the [SHIFT] button and turn the
[PROGRAM/BANK] control to select the desired
program to assign to the selected key.
The program number in the display change.
Recalling the assigned Quick Programs
1 Press and hold the [SHIFT] and [LATCH] buttons and
touch the desired key.
This instantly switches to the program assigned in “Assigning quick
programs to the keyboard keys” above.
Loading ...
Loading ...
Loading ...