Loading ...
Loading ...
Loading ...
42 GETTING TO KNOW YOUR INSTRUMENT PANEL
1. Turn the ignition switch to the ON position (do
not start the engine).
2. Fully push the accelerator pedal slowly, three
times, within 10 seconds.
3. Turn the ignition switch to the OFF position.
NOTE:
If the indicator message illuminates when you start
the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
DISPLAY SETUP MENU
The menu comprises a series of functions
arranged in a cycle. Push and release the
up or
down arrow button to access the different
options and settings (setup).
The setup menu can be activated by pushing the
MODE button. Single pushes on the up or
down arrow button will scroll through the
setup menu options. The menu items include the
following functions:
Speed Beep
Buzzer Volume
Seat Belt Buzzer (Just Available After SBR
Disable Made By CHR Service)
Exit menu
NOTE:
If equipped, some customer programmable
features will display in the Uconnect system. Refer
to your Uconnect Owner’s Manual Supplement for
further information.
Selecting An Option Of The Main Menu Without
Submenu
1. Briefly push and release the
MODE
button to
select the main menu option to set.
2. Push and release the up or down arrow
button (by single pushes) to select the new
setting.
3. Briefly push and release the
MODE button to
store the new setting and go back to the main
menu option previously selected.
Selecting An Option Of The Main Menu With
Submenu
1. Briefly push and release the
MODE
button to
display the first submenu option.
2. Push and release the up or down arrow
button (by single pushes) to scroll through all
the submenu options.
3. Briefly push and release the
MODE button to
select the displayed submenu option and to
open the relevant setup menu.
4. Push and release the
up or down arrow
button (by single pushes) to select the new
setting for this submenu option.
5. Briefly push and release the
MODE button to
store the new setting and go back to the
previously selected submenu option.
6. Push and release and hold the
MODE button to
return to the main menu (short hold) or the
main screen (longer hold).
VALUES DISPLAYED
NOTE:
All of the following items are accessed by pressing
the
TRIP button.
Range
This indicates the distance which may be traveled
with the fuel remaining in the tank, assuming that
driving conditions will not change. The message
“----” will appear on the display in the following
cases:
Distance less than 30 miles (or 50 km).
The vehicle is parked for a long time with the
engine running.
21_VF_OM_EN_USC_t.book Page 42
Loading ...
Loading ...
Loading ...