Loading ...
Loading ...
Loading ...
210 SERVICING AND MAINTENANCE
DOME LAMPS
See below steps to replace:
1. Using a suitable tool, insert the tip at the
location shown and press inward to the lamp
to relieve the spring tension. This will allow
you to easily drop the dome lamp assembly
from its bracket and disconnect the lamp.
Dome Lamp Assembly Location
2. Using a suitable tool, flex the housing to lift the
light pod cover away from the unit.
Dome Lamp Light Pod Cover
3. Remove and replace the bulbs as needed.
Dome Lamp Light Bulbs
4. Close the housing cover making sure it snaps
together properly and connect the lamp.
5. Install overhead console into place making
sure to seat the assembly’s forward end first
and then snapping it flush so that the tension
spring is fully seating in the housing.
TIRES
TIRE SAFETY INFORMATION
Tire safety information will cover aspects of the
following information: Tire Markings, Tire
Identification Numbers, Tire Terminology and
Definitions, Tire Pressures, and Tire Loading.
1 — Spring Tension Relief Access
2 — Dome Lamp Assembly
21_VF_OM_EN_USC_t.book Page 210
Loading ...
Loading ...
Loading ...