Loading ...
Loading ...
Loading ...
SERVICING AND MAINTENANCE 207
Replacing Exterior Bulbs
HEADLAMPS LOW BEAM AND HIGH BEAM
See below steps to replace:
1. Remove one retaining screw on the lower
headlamp filler panel. Remove filler panel.
2. Remove two retaining screws on the upper
headlamp filler panel. Remove filler panel.
3. Remove one upper retaining screw from the
headlamp housing.
4. Remove two lower retaining screws from the
headlamp housing.
5. Pull Headlamp forward, disconnect harness
electrical connector and remove the headlamp
assembly from vehicle.
6. Remove appropriate plastic cap from the back
of the headlamp housing.
7. Push down on the upper portion of the socket.
8. Pull the socket outward from reflector.
9. Pull bulb outward from socket.
10. Install new bulb.
11. Push socket back into reflector until it locks
back into place.
12. Install access cap.
13. Carefully reinstall headlamp in the same
position on the vehicle, so as not to affect
headlamp aiming.
14. Install one upper retaining screw on the
headlamp housing.
15. Install two lower retaining screws on the
headlamp housing.
16. Carefully reinstall the lower headlamp filler
panel and one retaining screw.
17. Carefully reinstall the upper headlamp filler
panel and two retaining screws.
Rear Backup Lamps 921
Rear Side Marker Lamps W3W
Front Fog Lamps H11
License Plate Lamps C5W
Front Roof Lamps WY5W
Rear Roof Lamps W3W
NOTE:
Numbers refer to commercial bulb types that can be purchased from an authorized dealer. If a bulb needs to be replaced, visit an authorized dealer.
Exterior Bulbs
Bulb Name Bulb Number
8
21_VF_OM_EN_USC_t.book Page 207
Loading ...
Loading ...
Loading ...