Loading ...
Loading ...
Loading ...
SERVICING AND MAINTENANCE 209
REAR TAIL, STOP, BACKUP, TURN SIGNAL AND
REAR SIDE MARKER LAMPS
See below steps to replace:
1. Open rear doors.
2. Remove the seven (7) fasteners from the rear
access cover and remove cover to gain access
to the Tail lamp assembly fasteners.
Rear Access Cover
3. Remove the two (2) 17mm tail light assembly
fasteners.
4. Disconnect the tail light harness connector
and remove tail light assembly from the
vehicle.
5. Remove the tail/stop, turn signal, backup and
rear side marker bulb/socket by rotating
counterclockwise.
6. Remove the bulb and replace as needed.
7. Reinstall bulb/socket and rotate clockwise to
lock in place.
8. Reinstall lamp.
Replacing Interior Bulbs
CARGO LAMP
See below steps to replace:
1. Using a suitable tool, remove either the lamp
above the back door or the sliding door lamp
as needed and disconnect it.
Rear Cargo Lamp Bulb Access
2. Using a suitable tool, pull open the metal bulb
access on the back of the housing.
Cargo Lamp Bulb Location
3. Remove and install the replacement bulb.
4. Close the bulb access, connect the lamp and
install the lamp into place.
8
21_VF_OM_EN_USC_t.book Page 209
Loading ...
Loading ...
Loading ...