Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 15
Equipped vehicles will automatically activate
the Auto-Lock feature when the odometer
reaches 75 miles. An ignition cycle is not
required to complete activation.
To enable this feature, close all vehicle doors and
proceed as follows:
1. Place the ignition in the MAR (ACC/ON/RUN),
engine not running, position.
2. Turn the headlight switch to the O (off)
position.
3. Pull the multifunction lever all the way
rearward toward the driver, and release.
4. Push the lock button on the driver’s side door
panel. The indicator light will illuminate to
show the doors are locked.
Push To Lock
5. Push the unlock button on the driver’s side
door panel to unlock the doors.
Push To Unlock
6. Push the lock button on the instrument panel.
The indicator light will illuminate to show the
doors are locked.
Lock Button On Instrument Panel
7. Push the lock button on the instrument panel
a second time to unlock the doors.
8. Pull the multifunction lever all the way
rearward toward the driver, and release.
9. Place the ignition in the STOP (OFF/LOCK)
position.
To verify the procedure is complete, place the
ignition in the AVV (START) position, then back to
the STOP (OFF/LOCK) position, and remove the key
from the ignition. Open, then close the front
driver’s door. After 10 seconds, the vehicle doors
will lock.
NOTE:
To disable the Auto-Lock feature, repeat this
procedure in order.
STEERING WHEEL
TELESCOPING STEERING COLUMN
This feature allows you to lengthen or shorten the
steering column. The telescoping control handle is
located below the steering wheel at the end of the
steering column.
2
21_VF_OM_EN_USC_t.book Page 15
Loading ...
Loading ...
Loading ...