Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR INSTRUMENT PANEL 41
features. Using a driver interactive display located
on the instrument panel, your instrument cluster
display can show you how systems are working and
give you warnings when they are not. The steering
wheel mounted controls allow you to scroll through
the main menus and submenus. You can access
the specific information you want and make
selections and adjustments.
LOCATION AND CONTROLS
The instrument cluster display features a driver
interactive display that is located in the instrument
cluster.
Instrument Cluster Display
This system allows the driver to select a variety of
useful information by pushing the switches
mounted on the instrument panel. Examples of
menu items are:
Speed Beep
Buzzer Volume
Exit Menu
If equipped with a Uconnect system, some
customer programmable features will display in
the radio
Ú page 79.
The system allows the driver to select information
by pushing the following buttons mounted on the
instrument panel to the left of the steering column:
Display Control Buttons
NOTE:
The
MODE button must be pushed prior to pressing
the
up and down arrow buttons.
MODE Button:
Push and hold the
MODE button for a time
longer than one second to access/select the
information screens or submenu screens of a
main menu item. Push and hold the
MODE
button for two seconds to reset displayed/
selected features that can be reset.
Up and Down Arrow Buttons:
Push and release the
up and down arrow
buttons to scroll upward and downward through
the main menu and submenus or adjust the illu-
mination on the instrument panel when the
headlights are on.
CHANGE ENGINE OIL — IF EQUIPPED
Your vehicle is equipped with an engine oil change
indicator system. The “Change Engine Oil”
message will display in the instrument cluster
display. The engine oil change indicator system is
duty cycle based, which means the engine oil
change interval may fluctuate, dependent upon
your personal driving style.
Unless reset, this message will continue to display
each time you turn the ignition switch to the ON/
RUN position. To turn off the message temporarily,
push and release the
MODE button. To reset the oil
change indicator system (after performing the
scheduled maintenance), refer to the following
procedure.
3
21_VF_OM_EN_USC_t.book Page 41
Loading ...
Loading ...
Loading ...